Usage

This device has been designed with the aim of forcing the personnel to pass through disinfecting their hands and the sole and sides of their shoes. It is designed as a platform. Compatible with modular products. In the sink, hands are washed with liquid soap and cleaned and dried with paper towels and used paper is thrown into the trash. Personnel will disinfect the side surfaces of boots when passing through the vertical brush section. The hygienic mat is then taken up by the excess disinfectant liquid that is transfered to the shoes. When both hands are inserted into the hand sanitizer container, the motion sensor will automatically switch on the device and spray 3-5 ml of alcohol-based disinfectant on the upper and lower part of the hands. The device then opens the tourniquet to allow personnel to pass. A warning tone will sound to indicate that a pass is granted. Staff must insert both hands into the chamber; otherwise, the device will not operate and personnel will not be allowed to pass. After the hands are disinfected, staff must pass through the tourniquet within 15 seconds, otherwise the right of passage will be canceled. The beep will silence. The direction of transition to the turnstile is indicated by green colored leds.

Maintenance

Clean your device regularly with a damp cloth or stainless steel surface polishers. Do not allow dirt or debris to block the drain hole of the sink. Remove any foreign dirt and debris from the hand disinfectant container to prevent the drain hole from clogging. Check the disinfectant container regularly and replace it when it is empty. Clean the mat, pan and pool regularly.

Accessory

This product can be equipped with a timed automatic filling and discharging system for the foot disinfectant pool. Liquid soap dispensers and paper dispensers on the device can be replaced if desired. Modular equipment can be connected.