Usage

This device has been designed with the aim of forcing the personnel to pass through disinfecting their hands and the soles of their shoes. It is designed as a platform. Compatible with modular products. In the sink, hands are washed with liquid soap and cleaned and dried with paper towels and used paper is thrown into the trash. The bottom surface of the shoes is disinfected as the personnel passes through the horizontal brushed section. The hygienic mat is then taken up by the excess disinfectant liquid that is transferred to the shoes. When you put both hands into the hand sanitizer container, the motion sensor will automatically switch on the device and spray 3-5 ml of alcohol-based disinfectant on the top and bottom of the hands. The device then opens the tourniquet to allow personnel to pass. A warning tone will sound to indicate that a pass is granted. Staff must insert both hands into the chamber; otherwise, the device will not operate and personnel will not be allowed to pass. After the hands are disinfected, staff must pass through the tourniquet within 15 seconds, otherwise the right of passage will be canceled. The beep will silence. The direction of transition to the turnstile is indicated by green colored leds.

Maintenance

 Clean your device regularly with a damp cloth or stainless steel surface polishers. Do not allow dirt or debris to block the drain hole of the sink. Remove any foreign dirt and debris from the hand disinfectant container to prevent the drain hole from clogging. Check the disinfectant container regularly and replace it when it is empty. Clean the hygienic mat, pan and shoe hygiene pool regularly.

Accessory

This product can be equipped with a timed automatic filling and discharging system for the foot disinfectant pool. Liquid soap dispensers and paper dispensers on the device can be replaced if desired. Modular equipment can be connected., AYG-02-130 Automatic vertical brush foot disinfectant module, AYG-02-140 Horizontal and vertical brush boat washing module.