Usage

This device has been designed with the aim of forcing the personnel to pass through disinfecting their hands and the soles of their shoes. It is designed as a platform. Compatible with modular products. In the sink, hands are washed and cleand with liquid soap and dried with paper towelsꓹ used paper is thrown into the trash. As the staff pass through the disinfectant pool, the bottom surface of their shoes is disinfected. Hygienic mats take the excess of disinfectant liquid that is transmitted to the shoes. When you put both hands into the hand sanitizer container, the motion sensor will automatically switch on the device and spray 3-5 ml of alcohol-based disinfectant on the top and bottom of the hands. Then the device opens the tourniquet to allow personnel to pass. A warning tone will sound to indicate that a pass is granted. Staff must insert both hands into the chamber; otherwise, the device will not operate and personnel will not be allowed to pass. After the hands are disinfected, staff must pass through the tourniquet within 15 seconds, otherwise the right of passage will be canceled. The beep will silence. The direction of transition to the turnstile is indicated by green colored leds.

Maintenance

Clean your device regularly with a damp cloth or stainless steel surface polishers. Remove any foreign dirt and debris from the hand disinfectant containerꓹ to prevent the drain hole from clogging. Check the disinfectant container regularly and replace it when it is empty. Clean the sanitary mat and pan and the shoe hygiene pool regularly.

Accessory

This product can be equipped with a timed automatic filling and discharging system for the foot disinfectant pool. Modular equipment can be connected and Liquid soap dispensers and paper dispensers on the device can be replaced.

AYG-02-120 Automatic horizontal brush foot disinfectant module, AYG-02-130 Automatic vertical brush foot disinfectant module, AYG-02-140 Horizontal and vertical brush boat washing module.